masih berupa bahasa inggris.. (saya pakai Ubuntu 11.04) pertama tama kita musti download dulu drivernya Disini atau di sini setelah itu taruh file hasil download tadi di desktop supaya lebih mudah menginstall nya, dan ini dia cara memasangnya :
In the terminal/console, enter the following commands (type all the text after the $ character and then press enter):
NoteThese instructions assume that the hplip-3.11.10.run file was downloaded to your Desktop directory. You may have to adjust the 'cd' command based on where your web browser saved the file on your system.
Step 3: Select the Install TypeSelect the install mode: Automatic (enter an 'a') or Custom (enter a 'c'). We recommended that most users select the Automatic install mode (what settings does automatic install mode use?)
Step 4: Verify your Linux Distribution
NoteEnsure the installer detected the correct Linux distribution. Different Linux versions use different install procedures if the incorrect version is selected, the installer may fail.
Step 5: Enter Your root/Superuser User Password
Step 6: Read the Installation NotesDepending on your Linux distribution some steps may need to be completed before going further with the HPLIP install. Please follow any directions given.
Step 7: Detect Any Missing DependenciesThe installer will now detect what dependencies your system will need to install before installing HPLIP. In addition any package manager clean up steps will be ran. These are executed to try and minimze any potential package manager problems.
Step 8: Download and Install Any Missing DependenciesIf your system is missing any dependencies they are now downloaded and installed.
Step 9: './configure' and 'make' will run./configure prepares HPLIP for install as well as your system is verified to have all the required dependencies for HPLIP.
'make' is then executed. Make compiles ("builds") HPLIP for your system.
Step 10: 'make install' is Run'make install' is the actual install procedure, this step is where HPLIP is actually being installed to your system.
Using 'hp-setup' to configure your printerThis guide will walk you through configuring your printer using 'hp-setup'.
Step 11: Select How Your Printer will be Connected to Your ComputerThe first step is to select the printer connection type:
Step 12: Select the Printer to be ConfiguredNext the setup tool will display printers detected (depending on the connection type selected):
Step 13: Select the PPD file (or driver) to be Used for Your PrinterThe PPD files (drivers) which are most similar to your printer are displayed. Select the appropriate PPD file for your printer.
Usually you will want to select the recommended PPD file.